Inductive linear displacement sensor-GCD—SE
Product Description
The GCD-SE Series of heavy-duty DC operated gage heads enable high performance in environments containing moisture, dirt, and fluid contaminants. With a spring loaded LVDT, a precision linear bearing, and internal conditioning electronics operating on a single ended 8.5 to 28VDC input with minimal current draw, the GCD-SE is ideally suited to portable measurement applications in difficult environments. Internal EMI, ESD and
RFI protection, provide CE compliance when correctly installed. Synchronous demodulation ensures unsurpassed noise rejection.
These robust gage heads allow measurements over stroke ranges from 0 to 0.1 inch [2.54mm] up to 0 to 2 inches [50.8 mm]. The spring force is typically 9oz [255 grams] at fully compressed electrical stroke. A removable black-chromed, hardened tool steel tip is threaded (4-48UNF2A) to the working end. Internal construction prevents the core and shaft from rotating as they move longitudinally. The integral electrical connector (welded) provides for easy installation and allows replacing a damaged cable without sacrificing the sensor. Installation and adjustment are facilitated by an external ½-20 mounting thread and the two locknuts supplied with each unit.
Key Features
Hermetically sealed housing
Single ended 8.5 to 24VDC supply
Low current consumption (only 6mA)
Ideal for battery operation
IEC IP68 rating to 1,000 PSI [70 bars]
Long strokes up to 2 inches
Hardened tool steel contact tip
High side load resistance
Applications
Roller Gap Control
In-process Wet Grinding
Hand Held Gages
X-Y Positional Feedback
Automotive chassis track testing
Remote site monitoring
Electrical Characteristics | |
Linear Displacement Sensor - LVDT/LVIT Supply Voltage (V) | 8.5 – 28 |
Analog Output | 0 – 5 V, 1 – 6 V |
Electrical Connections | 6-Pin Connector |
Body Features | |
Linear Position Sensor - LVDT/LVIT Form Factor | Cylindrical |
Spring Loaded | Spring Loaded |
Dimensions | |
Full Stroke Range (mm) | 12.7, 2.54, 50.8, 6.35 |
Full Stroke Range (in) | 0.1, 0.5, 2, 0.25 |
Linearity (% of Span) | ±0.25 |
Housing Features | |
Linear Position Sensor - LVDT/LVIT Housing Material | Stainless Steel |
Housing Diameter | 19.05 mm [0.75 in ] |
Industry Standards | |
IP Rating | IP68 |
Usage Conditions | |
Operating Temperature Range (°C) | -25 – 85 |
Environmental Specifications | 1,000 PSI Pressure |