DEWETRON's new DEWE3-PA8-RM is a high-performance power analyzer designed to fit in a 19-inch rack. It doesn't have an integrated display, but does have a display port and HDMI connection for external displays. The eight slots of the measurement module are locatedon the front panel for optimal accessibility. An integrated redundant sensor power supply for 8 sensors saves rack space and eliminates the need for an external power supply. All in all, the DEWE3-PA8-RM is the best power analyzer on the 5 U. The DEWE3-PA8-RM is not only our latest power analyzer, but also part of the DEWE3-RMx product line. These hosts are designed for 19-inch rack mounting. As a power analyzer, the DEWE3-PA8-RM stands out from other systems in the series. This new measurement system offers 8 slots for the use of the DEWETRON TRION and TRION3 modules. You can use up to 16 power channels simultaneously. Among other specifications, the integrated redundant sensor power supply, seamless raw data acquisition, and intelligent interface integration for remote control and configuration make the DEWE3-PA8-RM stand out among power analyzers.

Why use DEWE3-PA8-RM

  The integrated sensor power supply provides redundant power for up to 8 current transformers. This can be achieved by ±15 V or +9 V directly from the system. Therefore, no additional attachments are required. Setting up a measurement system has never been easier. Without additional equipment, you can also use the new power analyzer in a limited space. The signal input is available on the front, and even the system's fan can be accessed on the front. This enables you to modify and service the system without having to remove it from the cabinet. You can also replace the front hard drive. The DEWE3-PA8-RM has a maximum sampling rate of 10 MS/s/ channel and can continuously store up to 800 MB/s of raw data. This purpose can also add a 10 Gbit Ethernet interface to the system. This provides higher connectivity and speeds up data file downloads and data connections through OXYGEN-NET. By using OXYGEN-NET, you can virtually combine multiple measurement systems and easily configure and control them centrally from the main device. Another big advantage is the integration with various intelligent interfaces. Even without a display, the configuration is simple - you can follow standardized protocols over TCP/IP.

Dulwich is modular

  Like all DEWETRON test and measurement systems, DEWE3-PA8-RM offers maximum modularity and flexibility. You can equip your system with additional TRION or high-speed TRION3 modules. As mentioned earlier, you can also replace systems while they are mounted in a rack. Simply adjust the input signal you want to measure. Our measurement modules are suitable for a wide range of sensors. You CAN measure current, voltage, IEPE (vibration), bridge (strain gauge), potentiometer, RTD, CAN, instrument input and thermocouple. For synchronization, you can use an external time source such as GPS, PTP, or IRIG. Whatever your measurement task, TRION/TRION3 modules can be combined as needed to meet the requirements.

DEWE3-PA8-RM Power analyzer package

- 8 slots for TRION3™ and TRION™ series modules

- Up to 16 power channels,

- Integrated redundant 8x power supply for current sensors

- No display, 1 TB SSD for data storage and 256 GB SSD for operating system, all in separate removable drive bays

- 12x USB, 2x LAN, 2x display port, Lemo socket for EPAD, Tri-Sync-Bus

- 115/230 VAC 50/60 Hz power supply

TRION3-1810M-POWER-4 Data acquisition module

- TRION3™ module with 4 mm isolated banana socket

- Includes 4 Tron-Sub-X modules for low voltage current clamp or DC input

- Occupies 2 slots - High dynamic range up to 1000 Vrms - 10 MS/s per channel, 18 bit resolution

- Bandwidth DC to 5 MHz, anti-aliasing filter

- Measurement category: CATIV 600 V/CATIII 1000 V

- Includes OXYGEN data acquisition and analysis software

- Includes software options Oxygen - Optical - Power - Basic