Product Description

The LVM-110 is a full-featured LVDT/RVDT signal conditioner that delivers outstanding performance within a budget range. Operating from ±12 or ±15VDC supply voltages, the LVM-110 provides a full range of selectable unipolar and bipolar, low noise DC voltage outputs. Designed to be compatible with most LVDT and RVDT sensors, the LVM-110 is compatible with most LVDT and RVDT sensors and can operate with 5 and 6 electrically connected devices. This versatility is due to a wide range of selectable excitation frequencies, and a generous excitation drive current of 20mA. Allows for sensor input impedance down to 150 ohms as well as setup programs. The solo wire measures less than 2.5x2.5 inches. It can be mounted or stacked using permanently attached threaded standoffs. Threaded standoffs or card edge guides for mounting or stacking. ALL SELECTABLE OPERATING PARAMETERS All selectable operating parameters can be synchronized with two multiple regulators to prevent jump frequencies and crosstalk between sensors. No phase adjustment is required because the demodulator eliminates the need for phase correction.The LVM-110 is designed for easy installation and can be plugged into a backplane connector or used with other equipment. Easy access to the single DIP switch on the screw terminal isolation strip simplifies gain, frequency, and output

Key Features

- Low cost OEM signal conditioner
- Very compact, open PC board design
- Multiple unipolar and bipolar output options
- DIP switches select gain and excitation
- 2.5, 5, 8 and 10 kHz excitation frequencies
- Zero and range adjustment potentiometers
- Card-edge or barrier strip connections
- Operates with very low input impedance LVDTs and RVDTs

Applications

- Position Feedback Systems
- High Density Dimensional Gauge
- Space-constrained installations
- Test systems
- Integration into OEM machines